D-Link DFL-1660 User Manual page 423

9.2.3. IPsec Roaming Clients with
Pre-shared Keys
• An external authentication server.
An internal user database is easier to set up and is assumed here. Changing this to an external
server is simple to do later.
To implement user authentication with an internal database:
• Define a Local User DB object (let's call this object TrustedUsers).
• Add individual users to TrustedUsers. This should consist of at least a username and
password combination.
The Group string for a user can be specified if its group's access is to be restricted to
certain source networks. Group can be specified (with the same text string) in the
Authentication section of an IP object. If that IP object is then used as the Source
Network of a rule in the IP rule set, that rule will only apply to a user if their Group string
matches the Group string of the IP object.
• Create a new User Authentication Rule with the Authentication Source set to
TrustedUsers. The other parameters for the rule are:
Agent
XAUTH
2. The IPsec Tunnel object ipsec_tunnel should have the following parameters:
• Set Local Network to lannet.
• Set Remote Network to all-nets
• Set Remote Endpoint to all-nets.
• Set Encapsulation mode to Tunnel.
• Set the IKE and IPsec algorithm proposal lists to match the capabilities of the clients.
• No routes can be predefined so the option Dynamically add route to the remote network
when tunnel established should be enabled for the tunnel object. If all-nets is the
destination network, the option Add route for remote network should be disabled.
• Enable the option Require IKE XAuth user authentication for inbound IPsec tunnels.
This will enable a search for the first matching XAUTH rule in the authentication rules.
3. The IP rule set should contain the single rule:
Action
Allow
Note
Group has no meaning in Authentication Rules.
Auth Source
Local
Note
The option to dynamically add routes should not be enabled in LAN to LAN
tunnel scenarios.
Src Interface Src Network
ipsec_tunnel all-nets
423
Src Network Interface
all-nets any
Dest Interface Dest Network
lan
Chapter 9. VPN
Client Source IP
all-nets (0.0.0.0/0)
Service
lannet all_services