Table of Contents
Advertisement
Side—click once on the word Front to show the Side option list. If you are using a simplex (one-sided) scanner, only
the Front option will be available. If your scanner supports duplex (two-sided) scanning, the options Front, Back,
and Both will be available in the list.
•
Front—this is the Simplex side of the page. The area(s) specified for the Front will only apply to the Simplex
side of the page when scanning in Duplex. Therefore, if you scan 4 double-sided pages, the resulting image
file(s) will have redacted areas on pages 1, 3, 5, and 7.
•
Back—this is the Duplex side of the page. The area(s) specified for the Back will only apply to the Duplex side
of the page when scanning in Duplex. Therefore, if you scan 4 double-sided pages, the resulting image file(s)
will have redacted areas on pages 2, 4, 6, and 8.
•
Both—select this option if you want to specify an area that appears in the same place on both sides of the
page, such as a company logo, so you don't have to specify the same area separately for both the front and
back.
Click one time on the default value, 0.00 in each field, to enable the control box for you to input the start position
and redaction area size. The units of measurement is displayed on the lower-right corner next to the Paper size field.
•
From left—input the upper-left corner start position measured from the left-side of the page.
•
From top—input the upper-left corner start position measured from the top of the page.
•
Width—input the width of the area to be removed.
•
Height—input the height of the area to be removed.
®
®
Xerox
DocuMate
5445 / 5460
User's Guide
65
Hide quick links:
Advertisement
Table of Contents
