Wireless; Wifi 2.4Ghz / Wifi 5Ghz - NetComm NF8AC User Manual

Wireless

WiFi 2.4GHz / WiFi 5GHz

Basic
The Wireless Basic page allows you to enable the wireless network and configure its basic settings.
The following parameters are available:
PARAMETER
Enable Wireless
Hide Access Point
Clients Isolation
Disable WMM Advertise
Enable Multicast Forwarding (WMF)
Max Clients
Wireless Guest Network
Click Apply/Save to save the new wireless configuration settings.
www.netcommwireless.com
Figure 39: Wireless - Basic
Select to enable or disable the wireless network function
Select to hide or display the wireless network when an SSID scan is performed
Select to prevent clients on the wireless network being able to access each other
Select to prevent the NF8AC advertising its WMM function
Select to enable Wireless Multicast Forwarding. This can reduce latency and improve throughput for wireless clients
Enter the maximum number of wireless clients able to connect to the wireless network
Select to enable a separate Wireless Guest network, the same options are available for a Guest network as with the
main system wireless network.
DEFINITION
NetComm Wireless NF8AC User Guide
46