Page 2
This guide will not assist you to setup a new wireless network. Please refer to the wireless setup document for your model available from the support section of the NetComm* or Dynalink** website. Any changes to your wireless security settings will require you to reconfigure wirelessly connected devices to use the new security settings.
Page 3
Step 1: Selecting a wireless security type: There are a number of different types of wireless security to select from. Before changing your settings, check the types of security available on your modem/router and then consult your wireless adapter manufacturer to ensure your wireless adapter is compatible with your chosen security type. The most commonly used security types are: - WEP (64bit or 128bit) - WPA (Radius)
Step 3: Setting up your wireless security: Please ensure that your modem/router is connected to your computer using an ethernet cable before continuing. LOGGING IN TO THE WEB INTERFACE Open a web browser (such as Internet Explorer, Google Chrome or Firefox), type http://192.168.20.1 into the address bar and press enter.
Page 5
Wireless Security 5. Click on The menu at the left of the page and then click on option. 6. Select the current SSID (network name ) in the “Select SSID” field. 7. If you would like to select a different network security type instead, click the drop down menu in the “Network Authentication”...