NetComm NF8AC User Manual page 36

Static Route
The Static Route screen displays the configured static routes. Click the Add or Remove buttons to change settings.
To add a static route rule click the Add button. The following screen is displayed.
Enter the Destination Network Address, Subnet Mask, Gateway IP Address and/or WAN Interface. Then click Apply/Save to add
the entry to the routing table.
Policy Routing
This function allows you to add policy rules to certain situations.
Click the Add button to add a policy rule. The following screen is displayed.
Enter the details into the provided fields. The table below describes each field.
FIELD
Policy Name
Physical LAN Port
Source IP
Use Interface
Default Gateway
www.netcommwireless.com
Figure 11: Advanced - Routing - Static Route
Figure 12: Advanced - Routing - Add Static Route
Figure 13: Advanced - Routing - Policy Routing
Figure 14: Advanced - Routing - Add Policy Route
A user defined name for the policy route.
The LAN port to be used for the policy.
The IP address of the LAN device involved with the policy.
Select the Interface that the policy will employ.
Enter the gateway address.
DESCRIPTION
NetComm Wireless NF8AC User Guide
36