Connect the supplied power adapter to your router and press the on/off button to power the router on. Allow 60 – 90 seconds for the NF8AC to power up. Open a web browser (e.g. Internet Explorer, Firefox, Safari, etc) and type http://192.168.20.1...
Page 4
Using the menu on the left side of the screen, select Management then Settings and then Restore Default. Click the Restore Default Settings button to reset the device. Note: You must reset the router to the default settings after the firmware upgrade to ensure that it functions correctly. www.netcommwireless.com NetComm Wireless NF8AC Firmware Release Notes Rev. 1.0...
Fixed DSL sync blink issue when no connection to DSL port. ATM interface should get created with default VPI value 8 Enhancements Few enhancement in Quick Setup R5B015 – Initial production release New features None Enhancements None www.netcommwireless.com NetComm Wireless NF8AC Firmware Release Notes Rev. 1.0...