Storing Stations In Memory - JVC KW-XC838 Instruction Manual

Storing stations in memory

You can use one of the following methods to
store broadcasting stations in memory.
• Automatic preset: SSM (Strong-station
Sequential Memory)
• Manual preset
• Storing your favorite station into the EX button
Automatic preset: SSM
You can preset up to 6 local stations in each FM
band (FM1, FM2, and FM3).
1
Select the band (FM1, FM2, or FM3).
FM1
2
Press MODE repeatedly until "SSM"
appears.
3
Press SEL.
"--SSM--" appears, then disappears when
automatic preset is over.
Local stations with the strongest signals are
searched for and stored automatically in the band
you have selected (FM1, FM2, and FM3). These
stations are preset in the number buttons — No.
1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored
in the number 1 button will be automatically tuned
in.
FM2 AM
FM3
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz
into the preset channel number 1 of
the FM1 band
1
Select the FM1 band.
2
Tune in to a station (in this example,
of 88.3 MHz).
3
Press and hold the number button
(in this example, 1) for more than 2
seconds.
"P1" flashes for a few seconds.
4
Repeat the above procedure to store
other stations into other preset
numbers.
Press ¢
to tune in
to stations of higher
frequencies.
Press 4
to tune in
to stations of lower
frequencies.
9