Radio Operations; Listening To The Radio - JVC KW-XC838 Instruction Manual

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual
searching to tune in to a particular station.
Searching for a station automatically:
Auto search
1
Select the band (FM1, FM2, FM3 or
AM).
FM1
Note:
This receiver has three FM bands (FM1, FM2, and
FM3). You can use any one of them to listen to an FM
broadcast.
2
Start searching for a station.
When a station is received, searching
stops.
To stop searching before a station is received,
press the same button you have pressed for
searching.
8
FM2
FM3 AM
Selected band appears.
To search stations of
higher frequencies
To search stations of
lower frequencies
Searching for a station manually:
Manual search
1
Select the band (FM1, FM2, FM3, or
AM).
FM1
2
Press and hold ¢
until "M (manual)" starts flashing on
the display.
3
Tune in to a station you want while
"M" is flashing.
• If you release your finger from the button, the
manual mode will automatically turn off after 5
seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM and
9 kHz for AM) until you release the button.
FM2 FM3 AM
or 4
Press ¢
to tune in
to stations of higher
frequencies.
Press 4
to tune in
to stations of lower
frequencies.