Additional Information; Handling Cassettes - JVC KW-XC838 Instruction Manual

ADDITIONAL INFORMATION

Available characters
• You can the following characters to assign
names to station frequencies, CDs, and
external component. (See page 33.)
• You can display the information (album title,
performer name, song title, etc.) as ID3v1
tags when you playback an MP3 file with this
unit. (See pages 16 and 41.)
Capital letters
A B
F G
K L
P Q
U V
Z space
Small letters
a b
f g
k l
p q
u v
z space
Numbers and symbols
0 1
5 6
! "
'
&
+ ,
: ;
? @

Handling cassettes

The cassette deck built in this unit requires very
little attention, but you will be able to extend the
life of the cassette deck if you follow the
instructions in the column to the right.
38
C D E
H I J
M N O
R S T
W X Y
c d e
h i j
m n o
r s t
w x y
2 3 4
7 8 9
# $ %
( )
*
.
–
/
=
< >
_ `
space
To clean the heads
• Clean the heads after every 10 hours of use
using a wet-type head cleaning tape (available
at an audio store).
When the head becomes dirty, you may realize
the following symptoms:
– Sound quality is reduced.
– Sound level decreases.
– Sound drops out.
• Do not play dirty or dusty tapes.
• Do not touch the highly-polished head with any
metallic or magnetic tools.
To keep the tape clean
Always store the tapes in
their storage cases after
use.
• Do not store tapes in the
following places:
– Subject to direct sunlight
– With high humidity
– At extremely hot temperatures
CAUTIONS:
• Do not play the tapes with peeling labels;
otherwise, they can damage the unit.
• Tighten tapes to remove slack since loose tape
may become entangled with the mechanism.
• Do not leave a cassette in the cassette compartment
after use, as the tape may become slack.
The function below is also provided to ensure
the longer life of the cassette deck.
Ignition key-off release
When you turn off the ignition key with a
cassette in the compartment, the unit
automatically releases the tape from its head.