Overwrite All Data - Konica Minolta bizhub C203 Operation Manual

9
When the security kit is installed:
When the security kit is installed, [Encryption Priority] and [Overwrite Priority] appear.
The following items can be specified. (Default setting: Mode 1)
Item
Mode 1
Mode 2
Encryption Priority
Overwrite Priority
Reminder
When the setting for giving priority to encryption or overwriting is changed, the hard disk must be
formatted after restarting this machine. When you change settings, be aware that data will be deleted.
!
Detail
For more information on data deleted during hard disk formatting, refer to "Format HDD" on page 9-24.

Overwrite All Data

This operation deletes all data on the hard disk by overwriting.
1
To overwrite the data, select the delete method
2
Touch [Delete].
Overwriting is performed after the machine is restarted.
Reminder
Perform this operation before disposing of the machine. Before performing this operation, be sure to
consult with your service representative.
While the data is being overwritten, do not use the main power switch to turn the machine off and on.
9-22
Description
Overwritten with 0x00.
Overwritten with 0x00. % Overwritten with 0xff. % Overwritten with the letter [A]
(0x61). % Verifies.
Selected for performing high-level security encryption processing. Note that data
overwriting with encryption specified on the hard disk differs from overwriting
with [Mode 1] or [Mode 2] specifications. Normally, select [Encryption Priority].
Overwriting with encryption specified on the hard disk follows specifications with
[Mode 1] or [Mode 2]. Select this setting when the format of the data written to
the hard disk is considered important.
User box setting
bizhub C353/C253/C203 (FE2)