Toyota TNS300 RAV4 NAVIGATION SYSTEM Installation Instructions Manual page 20

RAV4 (A2)
Reinforcement
2
8
-a
3
Cross member
04-03
Vehicle wire harness
9
Excess main
wire harness
Fig. 26
8
-b
2
Fig. 27
RAV4 (RHD) - 20
10.
a) Attach the wire harness
na cord
vehicle wire harness using the wire ties
9
b) Bundle and attach the excess main
wire harness using foam
shown.
3
11.
a) Route the main wire harness
antenna cord
and then under the carpet behind the
cross member.
b) Attach the main wire harness
antenna cord
2
3 to the reinforcement and
(3x).
3 along the midconsole
3 using foam
TNS300
and anten-
8 -a (2x) as
2 and
2
and
8
-b (2x).