Precautions - Toyota TNS300 RAV4 NAVIGATION SYSTEM Installation Instructions Manual

RAV4 (A2)

PRECAUTIONS

PLEASE READ THOROUGHLY THESE PRECAUTIONS BEFORE THE INSTALLATION
• Be sure to disconnect the negative
(-) lead from the battery terminals.
• Do not pinch the rear wiring or har-
ness in the tightened part.
• When passing the wires through the
dashboard or other panels, use a
grommet to ensure waterproofing.
• Protect the wiring with tape when it
is passed through a hole.
• When disconnecting the connectors,
be sure to grip the connector body.
Do not tug on the wiring.
• Do not forcibly pull any car wiring
harness. Rough tugging may result
in opened connections, or a broken
wire or harness.
• Confirm that lamps, horn, wiper and
other car accessories operate normally.
04-03
• Protect your car with fender cov-
ers, seat and so on.
• Use the correct tool when tight-
ening bolts or nuts.
waterproof - O.K. !!
• Before drilling a hole, check
that the rear of the mounting
Grommet
wall is clear.
Taping
Stop it !
• Be sure to firmly tighten connec-
tors and terminals.
• Before connecting the power
wiring to the battery, check the
wiring connections, harness,
etc. to see that they are properly
secured.
• Check body and trim near area of installation to be certain no
dirt or scratches resulted from the installation.
RAV4 (RHD) - 2
TNS300
Insert completely