Stopping Playback; Pausing - Denon DN-2500F Operating Instructions Manual

(4) Stopping Playback

There are two ways to stop playback.
Press the PLAY/PAUSE button during playback to pause at that point.
Press the CUE button during playback to return to cue mode at the position at which playback started. (Back Cue)

Pausing

(5)
Press the PLAY/PAUSE button to switch between play and pause mode.
The PLAY/PAUSE LED blinks when the pause mode is set.
Figure 11 shows the relationship between the play and pause.
The player has completed the cue or pause operation and is waiting for the play start command.
When the PLAY/PAUSE button is pressed, playback starts and the cue point is stored in the memory.
Playing
The pause mode is set when the PLAY/PAUSE button is pressed again.
Pausing
Playback resumes when the PLAY/PAUSE button is pressed again.
Playing
14
Figure 10
Figure 11
Blinking