Starting Playback; Stopping Playback; Play/Pause And Standby/Cue Operations - Denon DN-C680 Operating Instructions Manual

(2) Starting Playback

(3) Stopping Playback

Sleep mode
The sleep mode is set if no operation is performed for 30 min-
utes in the standby, pause or manual search mode.
When in the sleep mode, press the PLAY/PAUSE button to search
for the position before the sleep mode was set and start
playback. Press the STANDBY/CUE button to search for the
position before the sleep mode was set and standby at that point.
14
(4) PLAY /PAUSE and STANDBY/ CUE Operations
•
The operation switches between playback and pause each time
the PLAY/PAUSE button is pressed.
•
When the STANDBY/CUE button is pressed during playback, the
pickup returns to the position at which playback was started.
The diagrams below show playback patterns when the PLAY/PAUSE
and STANDBY/CUE buttons are pressed.
When the PLAY/PAUSE button is pressed, playback starts and proceeds as
shown by the arrow on the diagram above.
If the PLAY/PAUSE button is pressed again during playback, the pause
mode is set at that point. Press the PLAY/PAUSE button again to resume
playback.
When the STANDBY/CUE button is pressed after starting playback by
pressing the PLAY/PAUSE button, the pickup returns to the position at
which playback was started and prepares for the next playback.
Press the PLAY/PAUSE and STANDBY/ CUE buttons alternately to start
playback repeatedly from the same position.
This function is called "Back Cue".
If the pause mode is set and playback is then resumed, the position to
which the pickup returns with the Back Cue function changes.