3) Recalling Data; Clearing Data - Denon DN-2500F Operating Instructions Manual

( 3) Recalling data

Clearing data

( 4)
When a custom setting memory disc is set in the player, the
flashes, indicating that there is a memory.
Use the TRACK >>l
and l<<
you want to recall.
appears in the memory section of the display after the track is se-
l ected.)
Press the CD 1 (or CD 2) button while pressing the MEMO CALL button.
(The memory number (0 to 199) of the recalled data flashes for approxi-
mately 3 seconds in the key section of the display.)
The data is recalled and the pickup moves to the cue point stored in the
memory.
( The CUE button's LED lights. If seamless loop data is stored, the LOOP,
A and B button's LEDs also light.)
I n addition, the playback pitch is fixed to the registered playback pitch.
( The pitch LED flashes.)
NOTE: The track starting position changes through audio detection,
so the time display of the called out cue point, A point and B
point may be different from when the points were stored in the
memory.
Use the TRACK >>l
and l<<
data you want to clear.
appears in the memory section of the display after the track is se-
l ected.)
buttons to select the track whose data
buttons to select the track whose
i ndicator
2 5