CYBEX Eagle Hip Abduction/Adduction Owner's Manual page 21

8. Install weight plate decals.
NOTE: You have the option to use pounds, kilograms or both.
A. Slowly and carefully peel off back side of decal. See
Figure 15. NOTE: When peeling off back cover, make
sure that the decals remain attached to the front sticker.
B. Align holes in decal with appropriate holes in weight
stack. NOTE: Do not allow the adhesive to touch weight
stack at this time.
C. Insert a guide pin through each hole of the template.
NOTE: A guide pin can be anything that fi ts through the
weight stack hole, such as a weight stack selector pin.
D. Carefully align decal and rub it onto weight plates.
E. Carefully remove front side, leaving decals adhering to
weight plates. See Figure 16.
NOTE: It is important that you perform regular inspection and
maintenance activities on your equipment. See the
CYBEX Eagle Owner's Manual for inspection and
maintenance activities. If you do not have a CYBEX
Eagle Owner's Manual or if you have any questions
or concerns, call CYBEX Customer Relations at
888-462-9239.
9. Verify proper operation.
10. Anchor machine to the fl oor.
A. Securely anchor machine to the fl oor using the anchor holes provided in each machine.
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor.
NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8" grade 2 bolts or better).
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or frame not
in contact with surface using fl at washers.
Cybex Eagle 11181 Hip Abduction/Adduction Owner's Manual
Front
Back
Figure 15
Guide Rod
Weight Stack
Figure 16
9 .0
2 0
1 8 .0
4 0
6 0
3 6 .0
8 0
4 5 .0
1 0 0
5 4 .0
1 2 0
6 3 .0
1 4 0
7 2 .0
1 6 0
8 1 .0
1 8 0
9 0 .0
2 0 0
9 9 .0
2 2 0 Kilograms
1 0 8 .0
2 4 0
1 1 7 .0
2 6 0
1 2 6 .0
2 8 0
1 3 5 .0
3 0 0
1 4 4 .0
Pounds
3 2 0
1 5 3 .0
3 4 0
1 6 2 .0
3 6 0
Assembly
Page 4-5