Device Information - D-Link EBR-2310 User Manual

Section 3 - Configuration
This page displays the current information for the EBR-2310. It will display the LAN, WAN (Internet), and Wireless
information.
If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be
displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use
Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.
General:
Displays the router's time and firmware version.
WAN:
Displays the MAC address and the public IP settings for the
router.
LAN:
Displays the MAC address and the private (local) IP settings for
the router.
LAN Computers:
Displays computers and devices that are connected to the router
via Ethernet and that are receiving an IP address assigned by
the router (DHCP).
IGMP Multicast
Displays the Multicast Group IP Address.
Memberships:
D-Link EBR-2310 User Manual

Device Information

47