Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.
Configure MAC
Select Turn MAC Filtering Off, allow MAC addresses listed below,
Filtering:
or deny MAC addresses listed below from the drop-down menu.
MAC Address:
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer to the
Networking Basics section in this manual.
DHCP Client:
Select a DHCP client from the drop-down menu and click << to
copy that MAC Address.
D-Link EBR-2310 User Manual
Network Filters
32