Port Forwarding - D-Link EBR-2310 User Manual

Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Name:
Enter a name for the rule or select an application from the drop-down
menu. Select an application and click << to populate the fields.
IP Address:
Enter the IP address of the computer on your local network that you
want to allow the incoming service to. If your computer is receiving
an IP address automatically from the router (DHCP), you computer
will be listed in the "Computer Name" drop-down menu. Select your
computer and click <<.
TCP/UDP:
Enter the TCP and/or UDP port or ports that you want to open.You
can enter a single port or a range of ports.
Example: 24,1009,3000-4000
Schedule:
The schedule of time when the Virtual Server Rule will be enabled.
The schedule may be set to Always, which will allow the particular
service to always be enabled. You can create your own times in the
Tools > Schedules section.
D-Link EBR-2310 User Manual

Port Forwarding

30