1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Router
  5. EBR-2310 - EN Broadband Router
  6. User manual

D-Link EBR-2310 User Manual

Ethernet broadband router
Hide thumbs Also See for EBR-2310:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link EBR-2310

Summary of Contents for D-Link EBR-2310

  • Page 2: Table Of Contents

    Advanced Network Settings ......39 Internet Setup ..........19 Administrator Settings ........40 Static (assigned by ISP) ......19 Time Settings ........... 41 Manual Configuration ........20 System Settings ..........42 Dynamic (Cable) ........20 Update Firmware ..........43 D-Link EBR-2310 User Manual...
  • Page 3 Sharing an LPR Printer .......... 68 Technical Specifications ........... 75 Registration ..............Networking Basics ............ 73 Check your IP address .......... 73 Statically Assign an IP address ......74 Contacting Technical Support ........76 Warranty ..............77 Registration ..............79 D-Link EBR-2310 User Manual...

  • Page 4: Product Overview

    Section 1 - Product Overview Product Overview Package Contents • EBR-2310 Ethernet Broadband Router • Power Adapter • Ethernet Cable • Manual on CD System Requirements • Ethernet-based Cable or DSL Modem • Computers with Windows , Macintosh , or Linux-based operating systems with an installed Ethernet adapter ®...

  • Page 5: Introduction

    The D-Link Express EtherNetwork EBR-2310 is a 4-port Ethernet Broadband Router. The D-Link EBR-2310 enables users to quickly and easily share a high speed Internet connection. The D-Link EBR-2310 also incorporates many advanced features, traditionally found in more expensive routers.
  • Page 6 Internet users. • Special Application Supported - Special applications requiring multiple connections, like Internet gaming, video conferencing, Internet telephony and so on. The EBR-2310 can sense the application type and open a multi-port tunnel for it. • DMZ Host Supported - Allows a networked computer to be fully exposed to the Internet. This function is used when the Special Application feature is insufficient to allow an application to function correctly.

  • Page 7: Hardware Overview

    WAN status indicator will light Green when there is good physical WAN connection. LAN Link/Act. Power Link status indicators light Power indicator will light Green. The LED flickers Green. when the corresponding port is sending or receiving data. D-Link EBR-2310 User Manual...

  • Page 8: Rear Panel

    (LAN.) Reset Used to restore the EBR-2310 back to factory default settings. *All ports (both LAN & WAN) are Auto-MDIX. All ports auto-sense cable types to accommodate Straight-through or Cross-over cable. D-Link EBR-2310 User Manual...

  • Page 9: Technology Introduction

    For example, a firewall can be configured to work with an FTP or Telnet server. Or a firewall can be configured to work with specific UDP or TCP ports to allow certain applications or games to work properly over the Internet. D-Link EBR-2310 User Manual...

  • Page 10: Introduction To Local Area Networking

    Leave the device powered on, do not disconnect the power Press the reset button and hold (use a paper-clip) Keep the button pressed about 10 seconds Release the button The EBR-2310 will then automatically reboot itself. D-Link EBR-2310 User Manual...

  • Page 11: Installation

    Installation Installation Location The EBR-2310 can be positioned at any convenient place in your office or house. No special wiring or cooling requirements are needed. However, you should comply with the following guidelines: • Place the EBR-2310 on a flat horizontal plane.

  • Page 12: Getting Started

    Section 2 - Installation Getting Started The EBR-2310 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the Quick Router Setup Wizard CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows XP.

  • Page 13: Configuration

    Navigator with Java Script enabled. Log in Open your web browser and type in the IP address of the EBR-2310 into the Location (for Netscape) or Address (for IE) field and press “Enter.” The default IP address of the EBR-2310 is 192.168.0.1 For example: http://192.168.0.1...

  • Page 14: Setup Wizard

    Section 3 - Configuration Setup Wizard You may run the setup wizard to quickly setup your router. Click Setup Wizard to launch the wizard. Click Launch Internet Connection Setup Wizard to begin. D-Link EBR-2310 User Manual...
  • Page 15 Section 3 - Configuration Click Next to continue. Create a new password and then click Next to continue. Select your time zone from the drop-down menu and then click Next to continue. D-Link EBR-2310 User Manual...
  • Page 16 Clone Your PC’s MAC Address and then click Next to continue. The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed. D-Link EBR-2310 User Manual...
  • Page 17 Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If you selected PPTP, enter your PPTP username and password. Click Next to continue. D-Link EBR-2310 User Manual...
  • Page 18 Click Connect to save your settings. Once the router is finished rebooting, click Continue. Please allow 1-2 minutes to connect. Close your browser window and reopen it to test your Internet connection. It may take a few tries to initially connect to the Internet. D-Link EBR-2310 User Manual...

  • Page 19: Internet Setup

    MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link EBR-2310 User Manual...

  • Page 20: Manual Configuration

    MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link EBR-2310 User Manual...

  • Page 21: Internet Setup

    MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link EBR-2310 User Manual...

  • Page 22: Internet Setup

    Enter a maximum idle time during which the Internet connection Time: is maintained during inactivity. To disable this feature, enable Auto-reconnect. DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.) D-Link EBR-2310 User Manual...
  • Page 23 MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link EBR-2310 User Manual...

  • Page 24: Internet Setup

    Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. DNS Servers: Enter the Primary and Secondary DNS Server Addresses (Static L2TP only). D-Link EBR-2310 User Manual...

  • Page 25: Internet Setup

    MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link EBR-2310 User Manual...

  • Page 26: Network Settings

    Local Domain: Enter the Domain name (Optional). Enable DNS Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link EBR-2310 User Manual...

  • Page 27: Dhcp Server Settings

    DHCP Server Settings DHCP stands for Dynamic Host Control Protocol. The EBR-2310 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.”...

  • Page 28: Virtual Server

    Section 3 - Configuration Virtual Server The EBR-2310 can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network).
  • Page 29 The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link EBR-2310 User Manual...

  • Page 30: Port Forwarding

    The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link EBR-2310 User Manual...

  • Page 31: Application Rules

    TCP or UDP, then enter the firewall (public) ports associated with the trigger port to open them for inbound traffic. The EBR-2310 provides some predefined applications in the table on the bottom of the web page. Select the application you want to use and enable it.

  • Page 32: Network Filters

    To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client: Select a DHCP client from the drop-down menu and click << to copy that MAC Address. D-Link EBR-2310 User Manual...

  • Page 33: Access Control

    P2P utilities or games. Add Policy: Click the Add Policy button to start the Access Control Wizard. Access Control Wizard Click Next to continue with the wizard. D-Link EBR-2310 User Manual...
  • Page 34 Enter the following information and then click Next to continue. • Address Type - Select IP address, MAC address, or Other Machines. • IP Address - Enter the IP address of the computer you want to apply the rule to. D-Link EBR-2310 User Manual...
  • Page 35 Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. D-Link EBR-2310 User Manual...

  • Page 36: Website Filters

    Save Settings. The text to be allowed will appear inthe list. To delete the text, click Clear the List Below. Website URL/ Enter the keywords or URLs that you want to allow. Any URL with Domain: the keyword in it will be allowed. D-Link EBR-2310 User Manual...

  • Page 37: Firewall Settings

    Section 3 - Configuration Firewall Settings A firewall protects your network from the outside world. The D-Link EBR-2310 offers a firewall type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications.

  • Page 38: Application Level Gateway (Alg) Configuration

    NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. MMS: Allows Windows Media Player, using MMS protocol, to receive streaming media from the Internet. D-Link EBR-2310 User Manual...

  • Page 39: Advanced Network Settings

    Enabled. UPNP provides compatibility with networking equipment, software and peripherals. WAN Ping: Unchecking the box will not allow the EBR-2310 to respond to pings. Blocking the Ping may provide some extra security from hackers. Check the box to allow the Internet port to be “pinged”.

  • Page 40: Administrator Settings

    Administrator tasks from the remote (Internet) host. Remote Admin The port number used to access the EBR-2310. Port: Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the EBR-2310 and 8080 is the port used for the Web Management interface. D-Link EBR-2310 User Manual...

  • Page 41: Time Settings

    To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set Time. You can also click Copy Your Computer’s Time Settings. Apply your computer’s date and time settings. Copy Your Computer’s Time Settings: D-Link EBR-2310 User Manual...

  • Page 42: System Settings

    Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot Device: Click to reboot the router. D-Link EBR-2310 User Manual...

  • Page 43: Update Firmware

    You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.ca.

  • Page 44: Ddns

    Enter the Host Name that you registered with your DDNS service provider. Username or Key: Enter the Username for your DDNS account. Password or Key: Enter the Password for your DDNS account. Timeout: Enter a time (in hours). D-Link EBR-2310 User Manual...

  • Page 45: System Check

    The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping. Ping Results: The results of your ping attempts will be displayed here. D-Link EBR-2310 User Manual...

  • Page 46: Schedules

    The list of schedules will be listed here. Click the Edit icon to make Schedule Rules changes or click the Delete icon to remove the schedule. List: D-Link EBR-2310 User Manual...

  • Page 47: Device Information

    Section 3 - Configuration Device Information This page displays the current information for the EBR-2310. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed.

  • Page 48: Log

    Refresh: Updates the log details on the screen so it displays any recent activity. Clear: Clears all of the log contents. Save Log: This option will save the router to a log file on your computer. D-Link EBR-2310 User Manual...

  • Page 49: Stats

    Section 3 - Configuration Stats The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the EBR-2310 on both the Internet and the LAN ports. The traffic counter will reset if the device is rebooted.

  • Page 50: Support

    Section 3 - Configuration Support D-Link EBR-2310 User Manual...

  • Page 51: Troubleshooting

    1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself.
  • Page 52 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your the web •...
  • Page 53 NT, 2000, and XP users type in cmd) and ® ® press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link EBR-2310 User Manual...
  • Page 54 • To change the MTU enter the number in the MTU field and click the Apply button to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link EBR-2310 User Manual...

  • Page 55: Assigning A Static Ip Address

    If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these instructions: • Go to Start • Double-click on Control Panel • Double-click on Network Connections D-Link EBR-2310 User Manual...
  • Page 56 Appendix A - Assigning a Static IP Address • Right-click on Local Area Connections. • Double-click Properties • Highlight Internet Protocol (TCP/IP) • Click Properties • Select Use the following IP address in the Internet Protocol (TCP/IP) Properties window (shown below.) D-Link EBR-2310 User Manual...
  • Page 57 • Input your DNS server addresses. (Note: If you are entering a DNS server, you must enter the IP Address of the Default Gateway.) The DNS server information will be provided by your ISP (Internet Service Provider.) D-Link EBR-2310 User Manual...

  • Page 58: Adding And Sharing Printers In Windows ® Xp

    If you do not need to share your printer on a network, follow these directions to add the printer to one computer. • Go to Start> Printers and Faxes D-Link EBR-2310 User Manual...
  • Page 59 Appendix B - Adding and Sharing Printers in Windows ® • Click on Add a printer • Click Next D-Link EBR-2310 User Manual...
  • Page 60 Play printer if it has been selected.) • Click Next • Select Use the following port: • From the pull-down menu select the correct port for your printer (Most computers use the LPT1: port, as shown in the illustration.) • Click Next D-Link EBR-2310 User Manual...
  • Page 61 • At this screen, you can change the name of the printer (optional.) • Click Next • Select Yes, to print a test page. A successful printing will confirm that you have chosen the correct driver. D-Link EBR-2310 User Manual...
  • Page 62 Appendix B - Adding and Sharing Printers in Windows ® • Click Next This screen gives you information about your printer. (The printer will begin to print a test page) Click Finish When the test page has printed, Click OK D-Link EBR-2310 User Manual...
  • Page 63 Appendix B - Adding and Sharing Printers in Windows ® • Go to Start> Printers and Faxes A successful installation will display the printer icon as shown at right. You have successfully added a local printer. D-Link EBR-2310 User Manual...

  • Page 64: Sharing A Network Printer

    Please follow these directions to use the Add Printer Wizard to share a printer on your network: • Go to Start > • Printer and Faxes • Click on Add a Printer • Click Next D-Link EBR-2310 User Manual...
  • Page 65 Appendix C - Sharing a Network Printer • Select Network Printer • Click Next • Select Browse for a printer • Click Next • Select the printer you would like to share. • Click Next D-Link EBR-2310 User Manual...
  • Page 66 Appendix C - Sharing a Network Printer • Click Finish To check for proper installation: • Go to Start > Printers and Faxes D-Link EBR-2310 User Manual...
  • Page 67 • Make sure you have already run the Network Setup Wizard on all the network computers. After you run the Add Printer Wizard on all the computers in the network, you can share the printer. D-Link EBR-2310 User Manual...

  • Page 68: Sharing An Lpr Printer

    • Go to Start > Printers and Faxes • Click on Add a Printer The screen to the right will display. • Click Next • Select Local printer… • Click Next • Select Create a new port D-Link EBR-2310 User Manual...
  • Page 69 • From the pull-down menu, select StandardTCP/IP Port, as shown. • Click Next • Please read the instructions on this screen. • Click Next • Enter the Printer IP Address and the Port Name, as shown. • Click Next D-Link EBR-2310 User Manual...
  • Page 70 • Enter the Port Name and the Printer Name or IP Address. • Select LPR • Enter a Queue Name (if your Print-Server/Gateway has more than one port, you will need a Queue name.) • Click OK D-Link EBR-2310 User Manual...
  • Page 71 • Select the printer you are adding from the list of Printers. • Insert the printer driver disk that came with your printer. • Click Have Disk If the printer driver is already installed, • Select Keep existing driver • Click Next D-Link EBR-2310 User Manual...
  • Page 72 • Please run the Add Printer Wizard on all the computers on your network in order to share the printer. Note: You must run the Network Setup Wizard on all the computers on your network before you run the Add Printer Wizard. D-Link EBR-2310 User Manual...

  • Page 73: Networking Basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 74: Statically Assign An Ip Address

    2000 - From the desktop, right-click My Network Places > Properties. ® Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.

  • Page 75: Technical Specifications

    Media Access Control • L = 5.6in (142mm) CMSA/CA with ACK • W = 4.3in (109mm) • H = 1.2in (31mm) LEDS Weight • Power • WAN 0.44 lbs (200g) • Local Network – 10/100 Warranty 1-Year D-Link EBR-2310 User Manual...

  • Page 76: Contacting Technical Support

    • Hardware Revision (located on the label on the bottom of the router (e.g. rev B1)) • Serial Number (s/n number located on the label on the bottom of the router). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.

  • Page 77: Warranty

    Appendix H - Warranty Warranty Subject to the terms and conditions set forth herein, D-Link Canada, Inc. (“D-Link”) provides this Limited Warranty: • Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and • Only for products purchased from D-Link or its authorized reseller or distributor and delivered within Canada. Limited Warranty: D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in workmanship and materials under normal use from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except as otherwise stated herein. • Hardware (excluding power supplies and fans): One (1) year • Power supplies and fans: One (1) year • Spare parts and spare kits: Ninety (90) days The customer's sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to repair or replace the defective Hardware during the...
  • Page 78 SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. Governing Law: This Limited Warranty shall be governed by the laws of the Province of Ontario and the federal laws of Canada applicable herein. Some provinces do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This Limited Warranty provides specific legal rights and you may also have other rights which vary from province to province. Trademarks: D-Link is a registered trademark of D-Link Canada, Inc. Other trademarks or registered trademarks are the property of their respective owners.

  • Page 79: Registration

    Appendix I - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 2.2 August 27, 2009 D-Link EBR-2310 User Manual...

Table of Contents