Time Settings - D-Link EBR-2310 User Manual

Section 3 - Configuration
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system
clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also
be configured to automatically adjust the time when needed.
Time Zone:
Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, select enabled or disabled,
Daylight Saving:
and enter a start date and an end date for daylight saving time.
Enable NTP
NTP is short for Network Time Protocol. NTP synchronizes
Server:
computer clock times in a network of computers. Check this box to
use a NTP server. This will only connect to a server on the Internet,
not a local server.
NTP Server Used:
Enter the NTP server or select one from the drop-down menu.
Manual:
To manually input the time, enter the values in these fields for the
Year, Month, Day, Hour, Minute, and Second and then click Set
Time. You can also click Copy Your Computer's Time Settings.
Apply your computer's date and time settings.
Copy Your
Computer's Time
Settings:
D-Link EBR-2310 User Manual

Time Settings

41