Other Functions; Initial Set Mode; D Memory Names - Icom IC-A110EURO Instruction Manual

■ Initial Set mode

The Initial Set mode is accessed at Power ON, and allows
you to set seldom-changed settings. In this way you can the
"customize" the transceiver operations to suit your
preferences and operating style.
D Entering Initial Set mode
q While holding down [V/M] + [TS](DIAL), push [POWER] to
turn ON the power.
• The transceiver enters the Initial Set mode and "MN", "BP", "ST"
or "PR" (p. 11) appears on the display.
w Push [TS](DIAL) to select the
desired item as descr ibed
below and to the right.
e Rotate [DIAL] to select the de-
sired option or setting.
r Push [SCAN] to exit the Initial
Set mode and return to the
previous operating mode.

D Memory names

This item allows you to display a memory name instead of
the frequency.
• When a memory channel has not been programmed with a name,
the frequency appears instead.

OTHER FUNCTIONS

D Beep tones ON/OFF
Confirmation beep tones normally
s o u n d w h e n yo u p u s h a key.
These can be turned ON or OFF,
as you prefer.
D Side tones ON/OFF
When using an optional headset
such as those from the David
Clark Co. using an adapter, the
transceiver outputs your transmit-
ted voice to the headset for moni-
toring.
• O p t i o n a l O P C - 8 7 1 H E A D S E T
ADAPTER is required.
5
10