Storing Your Own Sound Adjustments - JVC KD-S70R Instructions Manual

Storing your own sound adjustments

You can adjust the sound modes (BEAT, SOFT, POP: see page 22) to your preference and
store your own adjustments in memory.
3
1
SCM
Within
5 seconds
2
SEL
Within
5 seconds
3
Within
5 seconds
4
SCM
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 22.
2
Call up the sound mode you want to adjust.
See page 22 for details.
Select "BAS", "TRE" or "LOUD."
Adjust the bass or treble level or turn the
loudness function ON/OFF.
See page 20 for details.
Press and hold SCM until the sound mode
you have selected in step 1 flashes on the
display.
Your setting is stored in memory.
1, 4
25