Table of Contents
Advertisement
Appendix 3 – Startup Connections
Changing Bandwidth Profile and Internet Settings
The Connection screen allows you to change your bandwidth profile or Internet
settings. Normally the default settings work best. The selected bandwidth
profile needs to be less than your upstream speed. If the bandwidth selected
exceeds your upstream speed, the quality of your Ojo calls will deteriorate and
your Ojo may not function properly. If you do not know your upstream speed
or wish to confirm it, please call your ISP.
Bandwidth Profile allows you to change the bandwidth used during a call.
Internet Settings allows you to change the method Ojo uses for an IP
address. Reset Connection allows you to reacquire your Internet connection
without power cycling your Ojo.
Changing Bandwidth Profile
1
On the Home screen, press
or
SELECT. The Main Menu is displayed.
2
Highlight and select Connection to display the Connection screen.
3
Press
or
to highlight Bandwidth Profile and press SELECT.
4
Use the
and
keys on the handset to select one of the following
profiles: Cable Modem 150 kbps, DSL 100 kbps, DSL 150 kbps, or
T1 250 kbps.
5
After you select the desired profile, press SELECT.
6
Press
to save your Connection settings. Ojo prompts you to save the
settings. Choose "Yes" to save the settings and return to the Main Menu.
Changing Internet Settings
1
On the Home screen, press
or
SELECT. The Main Menu is displayed.
2
Highlight and select Connection to display the Connection screen.
32
to highlight MAIN MENU and press
to highlight MAIN MENU and press
Appendix 3 - Startup Connections
3
Use the
and
keys on the handset to select Get IP, then press
SELECT.
4
Use the
and
keys on the handset to select one of the following IP
methods: DHCP or Static IP Address.
5
After you select the desired method, press SELECT.
6
If you selected Static IP Address, you need to enter the following
information: IP Addr, DNS 1, DNS 2, Mask, or Route.
Important: Before entering any Static IP Address information, contact
your Internet Service Provider (ISP) to obtain the correct address
information. Entering incorrect information will render your Ojo
inoperable.
Write the address information obtained from your ISP in the spaces
below:
IP Addr:
_ _ _ . _ _ _ . _ _ _ . _ _ _
DNS 1:
_ _ _ . _ _ _ . _ _ _ . _ _ _
DNS 2:
_ _ _ . _ _ _ . _ _ _ . _ _ _
Mask:
_ _ _ . _ _ _ . _ _ _ . _ _ _
Route:
_ _ _ . _ _ _ . _ _ _ . _ _ _
7
Using the numeric keypad, enter the address
information you obtained from your ISP. Use
the
and
keys on the handset to move to
different Static IP address fields.
8
Press SELECT when the address information has been entered.
9
Press
save your Connection settings. Ojo prompts you to save the
settings. Choose "Yes" to save the settings and return to the Main Menu.
10
Press END to return to the Home screen.
33
Advertisement
Table of Contents
