Panasonic WV-CS850 Operating Instructions Manual page 29

COAXIAL ALARM OUT
Alarm output signals are supplied through the coaxial cable.
1. Move the cursor to COAX and select ON or OFF.
2. Press the CAM (SET) key.
ON: The camera sends an alarm output signal via the coaxial
cable after it turns to a preset position.
OFF: The camera does not send the output signal.
Note: The camera ignores alarm inputs during manual operation.
Password Lock (PASSWORD LOCK)
Caution: For security do not operate your VTR for recording while the
password menus displayed on the monitor.
A 3-digit number is used for a password to limit access to the privacy
zone settings.
1. Move the cursor to PASSWORD LOCK, then select ON or OFF by
moving the joystick to the left or right.
Note: ON or OFF can be changed only after going through the
password verification.
OFF: Access to the privacy zone settings is free. (ENB) follows
after ON or OFF of PRIVACY ZONE on the SPECIAL1 menu.
ON: Access is limited by the verification menu. (DIS) follows ON
or OFF of PRIVACY ZONE on the SPECIAL1 menu.
2. Press the CAM (SET) key.
PASSWORD VERIFICATION
3. The password verification menu appears.
3-1 Select a numeral for the first digit by moving the joystick to
the left or right, then press the CAM (SET) key. Though the
entered password is not displayed, the up-arrow moves one
character to the right.
3-2 Repeat the above step for the 2nd and 3rd digits.
Default : 123.
3-3 The cursor moves to OK after all the three digits are entered.
Except for changing the password to a new one, press the
CAM (SET) key.
If the correct password is entered, the screen returns to SPE-
CIAL1. The ON or OFF set on the SPECIAL1 menu is as set in
step 1.
If a wrong password is entered, the screen returns to the veri-
fication menu. Repeat steps 3-1 to 3-3 to verify the password.
3-4 To cancel a password incomplete or of a wrong number,
move the cursor to RESET or OK, and press the CAM (SET)
key. The screen returns to the verification menu.
3-5 To return to the menu to SPECIAL1 without verifying the pass-
word, move the cursor to RET, then press the CAM (SET) key.
29
Special 1 menu
** SPECIAL1 **
PRIVACY ZONE ON (ENB)
PROPO. P/T OFF
AREA TITLE ON (NESW)
PATROL PLAY
ALARM IN/OUT
PASSWORD LOCK OFF
CLEANING ON
EL-ZOOM OFF
PRESET ALM OFF
RET
PASSWORD
** PASSWORD? **
0 1 2 3 4 5 6 7 8 9
. . .
↑
OK RESET
NEW PASSWORD
RET