Switching Lights On And Off; Day Light Function (Daylight Driving Light); Automatic Driving Lamp Control - Skoda 2012 Superb Owner's Manual

Switching lights on and off

ä
First read and observe the introductory information and safety warn-
ings on page 54.
Switching on the parking light
›
Turn the light switch » Fig. 32 to position .
Switching on the low beam and main beam
›
Turn the light switch to position .
›
Push the main beam lever slightly forward in the spring-tensioned position to
switch on the main beam » Fig. 38.
Switching off lights (except daylight driving lights)
›
Turn the light switch to position 0.

DAY LIGHT function (Daylight driving light)

ä
First read and observe the introductory information and safety warn-
ings on page 54.
Switching on daylight driving lights
›
Turn the ignition on and turn the light switch to position 0 or .
Deactivating the function daylight driving lights
›
Pull the turn signal light lever towards the steering wheel within 3 seconds of
switching on the ignition and at the same time, slide it downwards and hold it in
this position for at least 3 seconds.
Fig. 32
Dash panel: Light switch
Activating the function daylight driving lights
›
Pull the turn signal light lever towards the steering wheel within 3 seconds of
switching on the ignition and at the same time, slide it upwards and hold it in
this position for at least 3 seconds.
On vehicles with an information display, the daylight driving lights can also be ac-
tivated or deactivated via the menu:
Settings
■
■ Lights & Vision
On vehicles with separate lights for daylight driving lights in the fog lights, the
parking lights and the licence plate light do not come on when activating the
function daylight driving lights (neither front nor rear).
When the daylight driving lights are switched on, the lighting of the instrument
cluster is switched on as well.

Automatic driving lamp control


ä
First read and observe the introductory information and safety warn-
ings on page 54.
Switching on automatic driving lamp control
›
Turn the light switch » Fig. 33
Switching off automatic driving lamp control
›
Turn the light switch to the position 0,  or .
If the light switch is in the position , the symbol illuminates when the ignition
is switched on  next to the light switch. If the low beam is activated with the
light sensor, the symbol  illuminates additionally next to the light switch.
Fig. 33
Dash panel: Light switch
to position .
Lights and Visibility

£
55