Operation
Fig. 7 Multi-functional indicator: Control elements on the windshield wiper
lever/control elements on the multifunction steering wheel
ä
First read and observe the introductory information and safety warn-
ings
on page 14.
The rocker switch
» Fig. 7
and the button
A
wiper lever. Switching over and resetting is performed with the adjustment wheel
on the multifunction steering wheel
D
Select memory
›
Briefly press the button
B
on the windshield wiper lever or the button
the multifunction steering wheel to select the desired memory.
Selecting functions with the help of the windshield wiper lever
›
Briefly press the rocker switch
A
tions of the multi-functional indicator one after the other.
Selecting functions with the help of the multifunction steering wheel
›
Press the button
to open the menu of the multifunction steering wheel.
C
›
Turn the adjustment wheel
upwards or downwards. This opens the individu-
D
al functions of the multi-functional indicator one after the other.
Reseting
›
Select the desired memory.
›
Press the button
or, where applicable, the button
B
16
Using the system
are located on the windshield
B
» Fig.
7.
up or down. This opens the individual func-
for more than 1 second.
D
The following readouts of the selected memory will be set to zero with the but-
ton
on the windshield wiper lever or with the button
B
steering wheel:
›
average fuel consumption,
›
distance driven,
›
average speed,
›
Driving time.
Outside temperature
ä
First read and observe the introductory information and safety warn-
ings
on page 14.
The outside temperature appears in the display when the ignition is switched on.
If the outside temperature drops below +4 °C, a snow flake symbol (warning sig-
nal for ice on the road) appears before the temperature indicator and a warning
signal sounds. After pressing the rocker switch
er
» Fig. 7
or the button
tion shown last is indicated.
WARNING
Do not only rely upon the information given on the outside temperature dis-
D
on
play that there is no ice on the road. Even at temperatures around +4 °C, black
ice may still be on the road surface – warning, drive with care!
Driving time
ä
First read and observe the introductory information and safety warn-
ings
on page 14.
The driving time which has elapsed since the memory was last erased, appears in
the display. If you wish to measure the driving time from a particular time, you
must set the memory to zero at this moment in time by pressing the button
the windshield wiper lever
tion steering wheel
» Fig. 7
The maximum time indicated in both memories is 19 hours and 59 minutes and on
vehicles which are fitted with an information display, it is 99 hours and 59 mi-
nutes. The indicator is set back to null if this period is exceeded.
on the multifunction
D
at the windshield wiper lev-
A
at the multifunction steering wheel
C
» Fig. 7
or the adjustment wheel
for longer than 1 second.
» Fig.
7, the func-
on
B
on the multifunc-
D