Honda Civic Service Manual page 456

Manual Transmission
Transmission Reassembly
N O T E : P r i o r t o r e a s s e m b l i n g , c l e a n a l l t h e p a r t s i n
solvent, dry them, and apply lubricant to any contact
surfaces.
1. Install the magnet (A) and differential assembly (B).
n-",-o
l;-D
Install the 28 mm spring washer (A) and 28 mm
washer (B) over the ball bearing (C). Note the
installation direction of the spring washer {A).
Apply vinyl tape to the mainshaft splines (D) to
p r o t e c t t h e s e a l . I n s t a l l t h e m a i n s h a f t a n d
countershaft (E) into the shift forks {F}. and install
t h e m a s a n a s s e m b l y .
13-46
\
4. Install the reverse shift fork.
6 x 1 . 0 m m
15 N.m (1.5 kgf.m,11 lbf.ft)
f . )
Installthe reverse idler gear (A) and reverse gear
s h a f t ( B ) b y a l i g n i n g t h e m a r k { C ) w i t h t h e r e v e r s e
g e a r s h a f t h o l e ( D ) .
(