Ford KA Owner's Handbook Manual page 39

001-025 Ford KA EN:001-025 Ford KA IT
Warning volume
(Adjusting the failure/
warning buzzer volume)
With this function the volume of
the buzzer which accompanies
the display of any failure/warning can
be adjusted according to 8 levels.
To set the desired volume, proceed
as follows:
– briefly press button : MENU
the previously set volume "level" will
flash on the display;
– press the button + or − for setting;
– briefly press button MENU
to go back to the menu screen or press
the button for long to go back to
the standard screen without storing
settings.
22
14-10-2010 11:20 Pagina 22
Adjusting the button volume
(Button Vol.)
This function may be used to adjust
the volume of the beep accompanying
the activation of buttons MENU
+ and − can be adjusted according to
8 levels.
To set the desired volume, proceed
as follows:
;
ESC – briefly press button : MENU
the previously set volume "level" will
flash on the display;
– press the button + or − for setting;
ESC – briefly press button MENU
to go back to the menu screen or
press the button for long to go back
to the standard screen without storing
settings.
Passenger front and side airbag
activation/deactivation and side
bag protection (chest/pelvis)
(where present)
,
ESC
This function is used to activate/
deactivate the front passenger's airbag.
Proceed as follows:
- press button MENU
MENU again after the message
ESC
;
ESC
(Bag pass: Off) (to deactivate) or
(Bag pass: On) (to activate) is displayed
by pressing buttons
– the confirmation request message
is displayed;
ESC
+
– press buttons
to select (Yes) (confirming activation/
deactivation) or (No) (to abort);
– briefly press MENU
setting and go back to the menu screen
or press the button for long to go back
to the standard screen without storing
settings.
and press
ESC
+ −
and ;
−
or
to confirm
ESC