Auto Redial - Canon imageRunner 2020 Facsimile Manual

4
Press [
The pause time can be set from 1 to 15 seconds in one second increments.
OK
You can also use the numeric keys to enter values.
You can change the value by pressing [
value using the numeric keys.
The selected mode is set.
Stop
5
Press [Stop] to return to the Standby display.

Auto Redial

Auto Redial enables the machine to automatically redial the recipient's fax number
if the recipient cannot be reached due to a busy line, or if a sending error occurs.
Auto Redial can be turned 'ON' or 'OFF'. If you set Auto Redial to 'ON', you can set
how many times the machine redials the number, the redial interval, and whether
the document should be sent again due to an error.
NOTE
The default settings are:
- Auto Redial: 'ON'
- Redial Times: 2 times
- Redial Interval: 2 minutes
- TX Error Redial: 'ON'
Additional
1
Functions
Press [Additional Functions].
] to set the pause time ➞ press [OK].
] or [
] or [ ], even if you entered the
Transmission Settings
6
6-15