Canon imageRunner 2020 Facsimile Manual page 132

4
Press [
press [OK].
OK
5
Press [
press [OK].
OK
6
Press [
press [OK].
You can set the volume to any level on a scale of 0 to 3.
OK
If you set the volume to <0>, the volume is muted and no tone will sound.
Stop
7
Press [Stop] to return to the Standby display.
] until <VOLUME CONTROL> appears ➞
] or [
] until <MONITOR VOL. CTRL> appears ➞
] or [
] to select the desired volume ➞
] or [
Adjusting the Line Monitor Volume
6
6-3