Switching On For The First Time - Topfield TRF-7260 User Reference

10 Setup
2.5 Switching ON for the first time
Now that you have your digital receiver connected, you should plug
it into a wall socket. Ensure that your television set is turned on and
on the correct video channel so that you will be able to see the display
from the digital receiver.
Press the button on the top left corner on the remote control. In a
little time, you may see a picture displaying a menu.
If you do not see a picture, try pressing the
control. If after several tries you still get no picture, check that the
television is set to the correct input. If the picture is good, you can
skip to §3.1 to search for available television and radio services.
Otherwise, you may need to temporarily connect the Composite video
connector (VIDEO) to your television set so that you can see the menu
in order to configure the video settings.
CAUTION
If the digital receiver no longer reacts properly to the remote control
commands, the batteries may be flat. Be sure to replace only with
1.5 V AAA size batteries, and observe the following precautions.
• Do not mix different types of batteries, or new and old batter-
ies.
• Do not use rechargeable batteries.
• Do not recharge the old batteries.
• In order to avoid any risk of explosion, observe the polarities
indicated inside the battery compartment.
• Do not subject to excessive heat such as the sun and fire.
• If you are not using the remote control for a long period of
time, remove the batteries. The manufacturer accepts no lia-
bility for the damage resulting from leaking batteries.
• Batteries, including those which contain no heavy metals,
may not be disposed with other household wastes. Please dis-
pose of used batteries in an environmentally sound manner.
Find out the legal regulations which apply in your area.
£
¢ ¡
button on the remote
VF