Connecting To Your Video Cassette Recorder; Switching On For The First Time; Inserting Batteries In The Remote Control - Topfield TF 7700HSCI User Manual

14 Setup

2.4.3 Connecting to your video cassette recorder

2.5 Switching on for the first time

2.5.1 Inserting batteries in the remote control

The digital receiver can also output video to another appliance
such as a video cassette recorder through an auxiliary SCART
connector.
Now that you have your digital receiver connected, you should
plug it into a mains socket. Ensure that your television set is
turned on, so that you will be able to see the display from the
digital receiver.
To insert the batteries, open the battery compartment by remov-
ing the lid, and then insert the batteries observing the polarity,
which is marked on the base of the battery compartment.
If the digital receiver no longer reacts properly to remote con-
trol commands, the batteries may be flat. Be sure to remove
To enjoy Dolby digital audio, your televi-
sion or audio system must be able to decode
Dolby digital audio, and you need to obtain a
S/PDIF cable. Plug one end of the cable into
the S/PDIF socket on the digital receiver, and
plug the other end into the matching socket
on your audio system.
You need to obtain a SCART cable to use the
auxiliary SCART connector. Plug one end of
the cable into the VCR socket on the digital re-
ceiver, and plug the other end into the match-
ing socket on your video cassette recorder or
suchlike.