Upnp - Planet Networking & Communication ICA-1200 User Manual

Choose the RTSP port. The RTSP protocol allows a connecting client to
RTSP Port start a video stream. Enter the RTSP port number to use. The default value
is 554.
Specify the range of transmission port number of video stream. The default
RTP Port range is 50000 to 50999. User can specify a number between 1024 and
65535.
1. To use the 3GPP function, in addition to previous section, you might
2. The camera must be set as Multi-profile mode, not Mega-pixel mode.
3. To use the 3GPP function, it strongly recommends installing the
NOTE
4. Port 554 is the default for RTSP service. However, sometimes, some
1.Choose a verified player (PacketVideo, QuickTime or Real player
currently)
Dialing
procedure
2. Use the following URL to access: rtsp://host/mpeg4/media.3gp
Where host is the host name or IP address of the camera.
Compatible
Please contact your dealer to get the approved list of compatible 3G
3G mobile
phone.
phone

3.5.8 UPnP

UPnP is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. This device is an UPnP
enabled Internet Camera. If your operating system is UPnP enabled, the device will automatically
be detected and a new icon will be added to "My Network Places." If you do not want to use the
UPnP functionality, it can be disabled
need more information or configuration to make this function work.
Otherwise this device cannot serve 3GPP stream.
Networked Device with a public and fixed IP address without any
firewall protection.
service providers change this port number for some reasons. If so,
user needs to change this port accordingly.
48
Full HD PoE/ Wireless Cube IP Camera
ICA-1200/W1200