Wireless (For Ica-W1200) - Planet Networking & Communication ICA-1200 User Manual

Gateway
Obtain DNS from
DHCP
Primary DNS
Secondary DNS
HTTP Port
NOTE: If you log in the camera as an ordinary user, setting function will be not available.
If you log in the camera as the administrator, you can perform all the settings
provided within the device.
When the configuration is finish, please click "OK" to save and enable the setting.

3.5.2 Wireless (For ICA-W1200)

If your device is a wireless model, you could assign the related parameters into wireless setting.
Using a wired connection ensures greater secrecy while making these settings. These settings
should always be made in the camera first and secondly in the wireless access point. This ensures
that the device is always accessible when making changes. Note that this function is only
available for the model with WLAN capability.
A gateway is a piece of software or hardware that passes information
between networks. You'll see this term most often when you either log
in to an Internet site or when you're transient email between different
servers.
Enable this checked box when a DHCP server is installed on the
network and provide DNS service.
When you send email or position a browser to an Internet domain such
as xxxxx.com, the domain name system translates the names into IP
addresses. The term refers to two things: the conventions for naming
hosts and the way the names are control across the Internet.
The same function as DNS1. It is option not necessary
The device supports two HTTP ports. The first one is default port 80
and this port is fixed. This port is very useful for Intranet usage. The
second HTTP port is changeable. Users could assign the second port
number of http protocol, and the WAN users should follow the port
number to login. If the http port is not assigned as 80, users have to
add the port number in back of IP address. For example:
http://192.168.0.20:8080.
Therefore, the user can access the device by either
http://xx.xx.xx.xx/, or
http://xx.xx.xx.xx:xxxx/ to access the device.
If multiple devices are installed on the LAN and also required to be
accessed from the WAN, then the HTTP Port can be assigned as the
virtual server port mapping to support multiple devices.
40
Full HD PoE/ Wireless Cube IP Camera
ICA-1200/W1200