Bottom Panel - Planet Networking & Communication ICA-1200 User Manual

2.1.2 Bottom Panel

ICA-1200
ICA-W1200
Interface
Audio/Video Output Jack
DC Power Jack
Factory Default Reset
Audio/Video-out Jack allows this device to output audio and
video signal. Use the attached A/V cable to connect A/V
device where white cable is for audio and yellow cable is for
video.
The input power is 12VDC.
Note that supply the power to the Camera with the power
adapter included in package. Otherwise, the improper power
adapter may damage the unit and result in danger.
This button is hidden in the pinhole. This button is used to
restore the all factory default settings. Sometimes restarting
the camera will make the system back to a normal state. If the
system still got problems after restart, user can restore the
factory default settings and install it again. To restore the
14
Full HD PoE/ Wireless Cube IP Camera
ICA-1200/W1200
Description