Infrared Remote Control - Carrier 40 GKX Owner's Manual

Split system “global cassette” indoor unit
Table of Contents

Advertisement

40 GKX
Infrared remote control (if applicable)
Fix the remote control holder to the wall, using the screw.
The remote control operates with two IEC LR03-type 1.5 V non
re-chargeable batteries. A fading display and reduced remote con-
trol operating range indicate that the batteries are exhausted.
How to insert the batteries:
The remote control batteries contain contaminating elements.
When exhausted, they must be disposed of in accordance with
local requirements.
Open the sliding cover.
Press
Remove the cover by pressing on the plastic catch on the rear of
the remote control.
M O D E
T E M P E R A T U R E
T E M P E R A
T I M E R
T I M E R
C L O C K
C L O C K
A I R
T U R E
A
B
C
D
E
F
G
H
I
J
K
L
M
Insert the batteries, paying attention to the correct polarity indicated
in the battery compartment; replace the cover.
BEEP
The maximum operating range for the remote control is approximately
6 meters. No obstructions (e.g.: curtains or plants) should be posi-
tioned between the remote control and the unit.
Direct sunlight on the unit receiver may interfere with good signal
reception. The remote control must be directed toward the unit
receiver when pressing the buttons of the desired functions. A
"beep" will indicate that the signal has been received. If the signal
has not been received, renewed transmission is necessary by
pressing any of the buttons E, F, L or J under the sliding cover.
After the "beep" signal, check the function displayed on the remote
control readout and adjust or modify the selection made, if necessary.
During signal transmission symbol 1
When symbol 1
is illuminated it is not possible to send other
signals.
In order to send a new signal, check that symbol 1
A.
Display
B.
ON/OFF button
C.
Timer mode ON/OFF button
D.
Mode selection button
E.
Increase temperature button
F.
Decrease temperature button
G.
Timer program selection button
H.
Set clock or timer hour button (Up)
I.
Set clock or timer hour button (Down)
J.
Fan speed selection button
K.
Night mode button
L.
Position of air outlet louvres
M.
Clock set button
E N G L I S H
will appear on the display.
is OFF.
GB - 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents