18. When the cuber is shut down and the red LED is illuminated, to reset
___A. Push the reset button.
___B. Close the proximity switch.
___C. Turn the power switch off at least 5 seconds.
___D. The board automatically resets after 2 minutes.
19. To test the board for proper proximity switch operation, the voltage reading across the
switch terminal is
___A. 2.5VDC
___B. 2.5VAC
___C. 5VDC
___D. 5VAC
© 2001, IMI Cornelius Inc.
I-Series Ice Machine Training Manual
- 33 -