Appendix F Multi Purpose Feeder Maintenance; Outline; Functions; External View And Component Names - Oki OKIPAGE 14i Maintenance Manual

APPENDIX F MULTI PURPOSE FEEDER MAINTENANCE

1.

OUTLINE

1.1

Functions

This Multi-Purpose Feeder is installed on the front section of the printer, and it supplies paper
automatically through the operation of pulse motor, which is driven by signals sent from the printer.
The main functions are the followings:
• Paper that can be used:
[Paper Types]
• Standard paper:
• Special paper:
• Cut sheet size:
Special size:
[Weight and Thickness]
• 16-lb to 32-lb (60~128 g/m
• For labels and OHP Sheets: Label sheets: 0.1 to 0.15mm
* When using sheets which exceed 24-lb, make sure that the paper exits through the face-up route.
1.2

External View and Component Names

Front Cover
41356801TH Rev.1
Xerox 4200 (20-lb)
OHP sheets (for PPC), label sheets (PPC sheets)
* Not guaranteed for OHP sheets with attachments on the edge or
reverse side.
Letter, Executive, A4, A5, B5, A6
Width:
Length:
2 )
OHP sheets:
Paper Feed Cover
Roller-A
Paper Guide-L
Figure 1-1
87 to 216mm
148 to 297mm
0.08 to 0.11mm
Link
Paper Guide-R
Paper Support
Roller-B
158 /