Disconnecting The Regulator; Disconnecting The Regulator From The Lpg Cylinder; Refilling The Lpg Cylinder; Reconnecting The Lpg Cylinder - Weber 3000 Owner's Manual

DISCONNECTING THE REGULATOR

FROM THE LPG CYLINDER
A) Remove the LPG cylinder by shutting off the gas
supply and disconnecting the hose and regulator
assembly from the cylinder.
m WARNING: Make sure that the cylinder
or regulator valve is closed.
Identify your regulator type. Follow the disconnection
instructions for that regulator.
Disconnect by Turning Anti-Clockwise
Unscrew regulator from cylinder by turning fitting anti-
clockwise (1).
Disconnect by Turning Clockwise
Unscrew regulator from cylinder by turning fitting
clockwise (2) (3).
Disconnect by Turning Lever
Turn regulator lever clockwise (4) to the off position.
Push in on regulator lever (5) until it releases from
cylinder (6).
Disconnect by Sliding Collar
Make sure regulator lever is in the off position
(7) (9). Slide the collar of the regulator up (8) (10) to
disconnect from the cylinder.
B) Exchange empty cylinder for a full cylinder.

REFILLING THE LPG CYLINDER

We recommend that you refill the LPG cylinder before it
is completely empty. To refill, take LPG cylinder to a "Gas
Propane" dealer.

RECONNECTING THE LPG CYLINDER

Refer to "CONNECTING THE REGULATOR TO THE LPG
CYLINDER."
30
WWW.WEBER.COM
®
DISCONNECTING THE REGULATOR
1
2
3
4
7
9
6
5
8
10