GasAlertMicroClip XT
Technical Reference Guide
Figure 3. Connecting the IR Link
20
1. Activate the detector and wait for the startup tests to
complete.
2. Connect the USB cable to the USB port on the computer.
3. Connect the USB cable to the IR Link.
4. Insert the IR link onto the IR interface on the back of the
detector.
5. Open Fleet Manager II and access the Sensors tab.
Refer to
Installing Fleet Manager
6. From the Sensors tab, click Retrieve from Device at the
bottom of the window.
The fields will populate with the detector's current configurations.
7. Refer to the descriptions in the following sections to
define settings and enable/disable options:
• Detector Identification
•
Sensor Configuration
(CO, O
• User Options
• Language Menu
8. When configuration of new settings is complete, click
Save to Device at the bottom of the window. The detec-
tor automatically updates with the new settings.
II.
, H
S, and LEL)
2
2