After Use - JVC YU30052-625-1 Instructions Manual

58
EN
Audio/Video cable (ø3.5 DV TV or VCR)
Cleaning The Camcorder
1 CLEAN EXTERIOR
Wipe gently with a soft cloth.
2 CLEAN LENS
Blow it with a blower brush, then wipe gently
with lens cleaning paper.
3 REMOVE POWER SUPPLY
Remove the battery pack or disconnect the AC
Power Adapter/Charger.
4 OPEN CASSETTE DOOR
There is no power to the camcorder, so the
cassette holder won't open.
5 PULL OUT VIEWFINDER
Pull out the viewfinder and slide its cover
open.
6 CLEAN VIEWFINDER
Remove dust using blower brush or cotton
swab (commercially available).
BATTERY PACK
CAM STAND
CASSETTE DOOR
CASSETTE HOLDER
7
RESET VIEWFINDER
Close the viewfinder's cover and push the
viewfinder back in.
8 CLOSE CASSETTE DOOR
Audio/Video Cable And CAM Stand
1 WRAP CABLE AROUND STAND
Position the plug of the Audio/Video cable
(ø3.5 DV TV or VCR) as shown in the
illustration, then wrap the cable around the
stand in the direction indicated.
2
CONFIRM PLUG POSITION
Make sure the white, red and yelow plugs are
positioned as shown in the illustration.

AFTER USE

VIEWFINDER COVER