Playback Menu - JVC YU30052-625-1 Instructions Manual

44
EN

Playback Menu

The Playback Menu allows you to set the following functions: Playback Sound (48 kHz, 32 kHz), Synchro
Comp, Display and Time Code . The following procedure applies to all except Synchro Comp (
1 ACCESS PLAYBACK MENU
Press MENU. The Playback Menu appears in
the viewfinder and on the connected TV.
2 SELECT FUNCTION
Place the pointer next to the desired function
by sliding the Zoom Lever, then press SET. The
pointer stops blinking, indicating that the
function has been selected.
POWER DIAL
SET
PLAYBACK
PLAYBACK MENU
4 8 kHz MODE FULL SOUND
3 2 kHz MODE SOUND 1
SYNCHRO 0 . 0
D I SPLAY ON
T I ME CODE OFF
I TEM ZOOM SW .
END SET SET BUTTON
MENU
ZOOM LEVER
4 8 kHz MODE
T
3 2 kHz MODE
SYNCHRO
D I SPLAY
W
T I ME CODE
END
3 SET FUNCTION PARAMETERS
Slide the Zoom Lever to cycle through the
available settings for the selected function, and
stop when the desired setting appears. Then
press SET, and the pointer automatically moves
to "END".
•To set parameters for other functions, repeat
steps 2 and 3.
4 CLOSE MENU
Press SET again, and the menu disappears.
Playback Menu
pgs. 54 – 55).
FULL SOUND
SOUND 1
SOUND 2
ON
OFF
ON
OFF
FULL SOUND
SOUND 1
0 . 0
ON
OFF
I TEM ZOOM SW .
SET SET BUTTON