Clock (Lithium) Battery Cr2025 Insertion/Removal - JVC YU30052-625-1 Instructions Manual

10
EN

Clock (Lithium) Battery CR2025 Insertion/Removal

This battery is necessary to operate the clock and to perform date/time settings.
BATTERY COVER
1 OPEN BATTERY COVER
Slide off as shown in the illustration.
2 REMOVE OLD BATTERY
Pull the battery holder out as shown, and slide
the battery down and out of the holder.
3 INSERT NEW BATTERY
Insert the battery, with the "+" side showing, in
the holder. Then insert the battery holder in the
battery cover.
4 CLOSE BATTERY COVER
GETTING STARTED
NOTES:
When the battery is depleted, the "
appears in the viewfinder after you turn the power
on.
See "SAFETY PRECAUTIONS" on page 2 for
information on safe handling of lithium batteries.
After changing the lithium battery, reset the date
and time ( pg. 11).
(Cont.)
" indicator