Husqvarna Automower 305 Operator's Manual page 40

Remote start (2-2)
The functions in this submenu are for situations
where the mower has to be controlled to reach
remote areas. This function is very useful in gardens
where, for instance, the front and back are joined by a
narrow passage where the charging station cannot be
installed.
With this function activated, Automower
follow the guide wire from the charging station to the
designated area. It begins to mow when it reaches
this area.
• Proportion (2-2-1)
Enter how often of all the times Automower
leaves the charging station that it has to follow
the guide wire to travel to the remote area.
The following five options can be selected;
- Never (0 %)
- Rarely (approx. 20 %)
- Average (approx. 50 %)
- Often (approx. 80 %)
- Always (100 %)
At all other times, the mower leaves the charging
station in the standard manner.
• Distance (2-2-2)
Enter the distance in metres from the charging
station along the guide wire to the remote area
where the mower begins mowing.
Tip! Use the Test OUT (2-3-2) function to
determine how far it is to the remote area. The
distance, stated in metres, will be shown in the
mower display.
Test settings (2-3)
In the Test settings menu, it is possible to test settings
for Remote start (2-2) and that the selected corridor
width works for the garden in question.
Test IN (2-3-1)
The Test IN (2-3-1) function is used to test how
Automower ® 305 finds its way into the charging
station.
40 - English
6. MENU FUNCTIONS
® 305 will
305
®
Proportion
Distance
Corridor width
Remote start
Test settings
Never
Rarely
Average
Often
Always
Test in
Test out