Thermos 4656110 Assembly Manual page 24

5. Hold hose end, insert nipple (C) into LP tank valve. Hand tighten
coupling nut, holding connector in a straight line (D) with
LP tank valve so as not to cross thread the connection.
D D D D D
6. Turn the coupling nut clockwise to tighten to a full solid stop. The hose end will seal
on the back-check feature in LP tank valve, resulting in some resistance. An
additional one-half to three quarters turn is required to complete connection.
Tighten by hand only - do not use tools.
NOTE: If you cannot complete connection, disconnect hose end and repeat steps 5
and 6. If you are still unable to complete the connection, do not use this
connector!
• Do not insert any foreign objects into the valve outlet. You may damage the valve and
cause a leak. Leaking propane may result in explosion, fire, severe personal injury, or
death.
• Never attempt to attach this grill to the self-contained LP gas system of a camper trailer
or motor home.
24 • Grill2Go
Hold coupling nut and hose end as shown
for proper connection to LP tank valve.
WARNING WARNING WARNING
WARNING WARNING
C C C C C
Nipple has to be centered
into the LP tank valve