LP Tank Leak Test
For your safety
• Leak test must be repeated each time LP tank is exchanged or refilled.
• Do not smoke during leak test.
• Do not use an open flame to check for gas leaks.
• Grill must be leak checked outdoors in well-ventilated area, away from ignition
sources such as gas fired or electrical appliances. During leak test, keep grill away
from open flames or sparks.
Use a clean paint brush and 50/50 soap and water solution. Use mild
soap and water.
Damage to gas train components can result.
Brush soapy solution
onto the shaded areas.
Connecting The Adapter Hose To The LP Tank
1. Use only adapter hose approved by safety testing
organizations. (CSA, UL,etc)
2. Turn all control knobs to the OFF position.
3. Turn LP tank OFF by turning hand-wheel clockwise
to a full stop.
4. Remove the protective cap from LP tank valve.
Always use cap and strap supplied with valve.
B B B B B
Do not use household cleaning agents.
an LP gas supplier or
your fire department!
Use of this POL transport plug (B) (plastic part with
external threads) will defeat safety feature of valve.
If
"growing"
bubbles appear
do not use or move
the LP tank. Contact
Safety
Relief Valve
OPD Hand Wheel
A A A A A
Type 1 outlet with
thread on outside
Strap and Cap
Grill2GO • 23