Geemarc AMPLIDECT 280 Manual page 27

Audio Setup
You can also use the menu to adjust the audio
volume.
1. Perform steps 1 and 2 of previous paragraph
p37.
2. Press the key to choose Audio Setup
menu, press the Select soft key.
3. Use the key to choose Speaker V. or
Earpiece V., press Select soft key.
4. The display show the current setting. Use the
key to choose the volume level (Volume 1
-Volume 5), press the Save soft key.
38
Key Tone
Every time you press a key, your handset
acknowledges it with a key tone. You can
disable the key tones for silent use. In certain
error conditions, a warning tone will sound
when an incorrect key is pressed.
1. Perform steps 1 and 2 of paragraph "Setting
Alarm".
2. Press key to choose Tone Setup menu,
press the Select soft key.
3. Press the Select soft key again to choose
Key Tone.
4. You can use the key to choose On or Off
to enable or disable the function.
5. Press the Save soft key.
Note:
For normal use, we recommend you
leave the key tone enabled. This makes
the phone easier to use.
Add CID Number to Phone Book
1. Perform steps 1 and 2 of previous paragraph.
2. Use the key to view the numbers. When
the desired number displays on the LCD, press
the More soft key to enter Add to PB menu.
3. Press the Select soft key, you are prompted to
enter the name.
4. Enter the name and press the Next soft key,
then you can modify the number you want to
store.
5. Press the Next soft key, you are able to select
the ring tone from Melody 1 to Melody 10,
press the Save soft key to confirm and exit,
you will hear a confirm beep.
Delete a number in the CID Book
1. Perform steps 1 and 2 of paragraph "View
and dial any of the CID numbers"p22.
2. Scroll to the number you want to delete by
using the key.
3. When the desired number appears on the
display, press the More soft key.
4. Use the key to choose Delete, press
the Select soft key. The display will show
"Confirm ?". Press the Del soft key to
confirm, you will hear a beep and the LCD
shows the next number.
Delete all numbers in the CID Book
1. Perform steps 1 and 2 of paragraph "View
and dial any of the CID numbers".
2. Press the More soft key and use the
key to choose Delete All menu, then press
the Select soft key.
3. The display shows "Confirm ?", press the
Del All soft key to confirm.
Result: You hear a beep and the phone
returns to the Standby mode after
clearing all the CID numbers.
23