Capital GSCR604GW Use And Installation Manual page 23

L O C A T I N G R A T I N G P L A T E
LOCATING RATING PLATE
SERIAL #, MODEL # AND VERIFYING GAS TYPE
The rating plate contains necessary information
regarding your range. It provides the model #, serial
# and verifies the gas type and BTU input ratings
for each burner of your appliance. When calling for
service, please have this information at hand.
The model#, serial # and gas type information is
located in two places. First, when you open the oven
door, you will find a sticker that shows the model #
followed by either an N (for natural gas) or L (for LP
gas), and the serial # (see picture).
The rating plate, showing the model #, serial #, gas
type and gas BTU input ratings for each burner, as
well as necessary information from ETL test labs,
is located behind the kick-plate. You will need to
remove the kick-plate to access this information
(see picture).

Model #, Serial #, and gas type location
Rating Plate w/ BTU ratings
Model #, Serial # and gas type location
BTU ratings for each burner