Cadillac 2014 ELR Owner's Manual page 63

Cadillac ELR Owner Manual (GMNA-Localizing-U.S./Canada-6081525) -
2014 - crc - 10/2/13
Storing Memory Positions
To save positions to the 1 and 2
buttons:
1. Adjust the driver seat, outside
mirrors, and the power tilt and
telescoping steering column to
the desired driving positions.
2. Press and release SET, then
immediately press and hold 1
until a beep sounds.
3. Repeat Steps 1 and 2 for a
second driver using 2.
To save positions to the
button and easy exit features:
1. Adjust the driver seat, power tilt
and telescoping steering column,
and the outside mirrors on some
vehicles to the desired positions
for getting out of the vehicle.
2. Press and release SET, then
immediately press and hold
until a beep sounds.
Manually Recalling Memory
Positions
If the vehicle is OFF or not in
P (Park), press and hold "1," "2," or
to manually recall the previously
stored memory positions. Releasing
"1, "2," or before the stored
positions are reached stops the
recall.
If the vehicle is ON and in P (Park),
press and release 1, 2, or
manually recall the previously
stored memory positions. Placing
(Exit)
the ignition in OFF before the stored
positions are reached stops the
recall.
If something has blocked the driver
seat and/or power tilt and
telescoping steering column while
recalling a memory position, the
recall may stop. Remove the
obstruction; then press and hold the
appropriate manual control for the
memory item that is not recalling for
two seconds. Try recalling the
memory position again by pressing
the appropriate memory button.
Black plate (7,1)
Seats and Restraints
If the memory position is still not
recalling, see your dealer for
service.
Automatically Recalling Memory
Positions (Auto Memory Recall)
The Auto (Automatic) Memory
Recall feature automatically recalls
the current driver s previously stored
1 or 2 position when entering the
vehicle.
to
Depending upon the Auto Memory
Recall feature enabled in the vehicle
personalization menu, memory 1
or 2 positions are recalled in the
following ways:
To activate the recall when On -
Driver Door Open is selected in the
personalization menu, do one of the
following:
Press on the RKE transmitter
and open the driver door.
Press on the RKE transmitter
when the driver door is
already open.
3-7